Product Specification unless deselected above
|Maximum Flowrate (ml/min)
|| Dust Sampling, Vapour Sampling
|| ATEX, Direct Reading
|Available Outside the UK?
Complete Dust and Vapour Air Sampling Kit - Sidekick and Calibrators
The Sidekick is one of the most popular sampling pump meters around. It is a precision sampling multi-function pump for high and low sampling. This product is highly reliable and simple to use because it has been built to withstand the toughest of environments. This Kit comes with the Deluxe Sidekick, with ATEX Approval and Timers meaning it's suitable for use in Hazardous Environments. A snap-shut case controls the Sidekick so the unit cannot be accidentally shut off whilst it is in use.
- Flow Range 5 – 3000 ml/min
- Low Flow Capabilities
- Multi Tube Sampling in Low Flow
- Built in Particle Trap
- Built in Dampener
- High Accuracy Clock
- Light Weight
- Simple to Use
- Manually Adjustable
- Robust Case
- Battery or Mains Operated
The Sidekick has a flow range of 5-3000 millilitres per minute. Additionally a CPC and a low flow adapter provide the option to sample gases and vapours for up to 500 millilitres per minute. Supporting multi-tube sampling at the same time from one pump all at different flow rates is an advantage of this system. The Sidekick is a popular choice because it has the ability to sample for different hazards without needing more than one pump. As the controls are under a "snap down" cover it prevents accidental operation, therefore it has been proven to be a winner with safety managers and hygienists. The Sidekick is available in a number of different variations depending on your requirements. Please Note. A Filter Medium will also be required. Due to the large number of filter mediums available we will contact you to find out your specific requirements. Paper and Sorbent filter mediums are all priced separately.
Bubble Film Flowmeter
This product is the Bubble Film Flowmeter and it checks the operation of air sampling equipment and it allows for simple and easy operation. You can calculate the flow rates if you attach a sampling pump to the top of a volumetric glass tube which contains liquid soap. When the pump is drawing in air through the tube the soap bubble will move from one marked point to the next one. You can then calculate the flow rate by the time of travel which is measured by a stopwatch. This kit is supplied with all the equipment which is required, except the stopwatch, for calibrating low flow personal sample pumps.
SKC Chek-Mate Flowmeter 0.5 - 5.0 L/MIN
This is the SKC Chek-Mate Flowmeter 0.5 - 5.0 L/MIN which is an easy to use differential pressure flowmeter for calibrating air flow sample pumps. It meets the accuracy requirements of MDHS 14/4 and other HSE sampling methods.
Easy to use:
- No moving parts
- Can be used in any orientation
- Built-in temperature and atmospheric pressure compensation
- Short stabilisation time
- Accuracy to 1% over the vast majority of the measuring range
- Auto-shutoff to conserve battery
- Compact, portable and lightweight
- CalChek automatic flow calibration with specific SKC sample pumps
- Connect sample train to the chek-mate
- Press the only button to turn the chek-mate on
- Wait for flow reading to stabilise to within 1-2 ml/min
- Adjust pump flow if necessary
- Turn off chek-mate
This product incorporates a CalChek communication interface which allows for automatic flow calibration of the AirChek 3000 and AirChek Touch pumps. A CalChek communication cable is plugged into the CalChek socket on the side of the Chek-Mate and the DataTrac interface socket on the AirCheck 3000 pump or the charging cradle for AirChek Touch pumps. The Chek-Mate’s CalChek function allows single point flow calibration of complete sample trains as well as full CalChek calibration, calibrating the pump across its entire operating range without being connected to a sample train. A pulsation dampener is required to be fitted between the Chek-Mate outlet and pump inlet ports when performing a full CalChek calibration.
Click Here to be Directed to a Glossary of Terms for Air Sampling
Sidekick Models Include:
- Sidekick Standard Sample Pump
- Sidekick ATEX Approved Intermediate Pump
- Sidekick ATEX Approved Deluxe Pump with Elapsed Timer
Each Sidekick Model comes with the following variations:
- Sidekick Pump Only
- Sidekick Pump Basic Kit
- Sidekick Pump Kit for Dust/Particulates
- Sidekick Pump Kit for Gas/Vapour
- Sidekick Pump Kit Combined Dust/Particulates and Gas/Vapour
Each Kit is available with a Single Pump or Five Pumps.