SKU
06210-5001

SKC AirChek XR5000 Pump with 4 cell Li-Ion battery

SKC
Add to Wish List Email to a Friend
The SKC AirChek XR5000 sample pumps are designed to offer users enhanced battery power and easy operation in a lightweight pump that provides accurate airflows from 5-5000 ml/min (5-500 ml/min requires a low flow adaptor kit).
£922.00
Add to Compare

Product Specification unless deselected above

More Information
Minimum Flowrate (ml/min) £1,000.00
Maximum Flowrate (ml/min) £5,000.00
Brand SKC
Available Outside the UK? No

SKC AirChek XR5000 Pump with 4 cell Li-Ion Battery

The SKC AirChek XR5000 Sample Pumps are designed to offer users enhanced battery power and easy operation in a lightweight pump that provides accurate airflows from 5-5000 ml/min (5-500ml/min requires a low flow adapter kit). Three battery options are available which provides flexibility and economy for different users and different applications including long run times.

Features:

  • Patented highly accurate isothermal flow control compensates within ±5%
  • Extended flow rate and run time
  • Easy-to-use three button keypad
  • Set and go timer for timed and delayed runs
  • Large LCD and bright operational LED
  • Flow correction for changes in temperature
  • Flow fault, low battery fault, auto-off & locking keypad
  • Standard Li-Ion model weighs less than 500g


The AirChek XR5000 is also available in basic pump, dust sampling, vapour/gas sampling and combined dust/vapour sampling kits.

Flow Range: 

1000 to 5000 ml/min (5 to 500 ml/min requires optional low flow adapter kit)

Compensation Range:
5000 ml/min at 10 inches water back pressure
4000 ml/min at 20 inches water back pressure
2000 ml/min at 50 inches water back pressure

Typical Back Pressure of Sampling Media (inches water)

Flow Rate (L/min)       1.0             1.5             2.0             2.5        3.0       3.5            4.0             5.0       
 Filter/Pore Size (μm)                
 25-mm MCE/0.8  6   9  12  15  18  21  25  31
 25-mm MCE/0.45  14   22  28  35  40  44  50  63
 37-mm MCE/0.8  2   3  4  5  6  7  9  11
 37-mm PVC/5.0  1   1  2  2  2.5  3  3  4
 37-mm, polycarbonate/0.45  4  6  8  10  12  15  17  21
 25-mm MCE/0.45 microvacuum  21   31  40  48  59  69  79  100
 37-mm PTFE/1.0  1.5   2.5  4 5.5   7  8 9.5  12 

Flow Compensation System:
Patented* isothermal closed loop flow sensor

Accuracies:
Timing:
1 min/mo at 25 C
Flow Rate:
± 5% of set-point after calibration to desired flow

Battery Charge Level Indicator:
Icon displays on LCD at full, mid, low charge, imminent low battery fault, and low battery fault.

Temperature Range:
Operating:
32 to 113 F (0 to 45 C)
Charging:
32 to 113 F (0 to 45 C)
Storage:
-4 to 95 F (-20 to 35 C)

Operating Humidity: 0 to 95% non-condensing

Typical Run Time† :

XR5000 Model 2 L/min 5 L/min
High-power Li-Ion 40 hrs  22 hrs 
Standard Li-Ion 20 hrs 11 hrs

† Results of run time tests using 37-mm, 0.8-μm MCE filters with new pumps and batteries. Pump and battery performance may vary.

For extended run times, the pump may be operated while attached to the charger.

Timed Run, Run Delay, and Continuous Run 1 to 9999 minutes (6.8 days). If run time exceeds
Display Range: 6.8 days, timer display rolls over.

Flow Fault:
If the pump is unable to compensate for > 15 seconds due to excessive back pressure, the pump stops, displays flow fault icon, and holds run time display. Auto-restart is attempted every 15 seconds up to 5 times.
Low Battery Fault: 15 seconds to sleep

What's in the Box

  • AirChek XR5000 Pump
  • 4 cell Li-Ion battery pack
  • UL Approved
  • Operating manual
Write Your Own Review
You're reviewing:SKC AirChek XR5000 Pump with 4 cell Li-Ion battery