SKU
06224-44MTXKC-1

SKC Universal Dust and Vapour Sampling Kit

SKC
Add to Wish List Email to a Friend
The SKC Universal sampling pump has a wide flow range which allows dust, gas, bag and impinger sampling which when taken all together cover almost all sampling methods to met COSHH requirements. The Universal is suitable for particulate and vapour sampling and has both an inlet and an exhaust port for easy bag sampling. ATEX approved and capable of flows between 5 and 4000 ml/min without requiring an adaptor, the Universal does everything
US$1,217.77
Add to Compare

Product Specification unless deselected above

More Information
Features ATEX, Airflow, Sampling Pump
Application Impinger Sampling, Vapour Sampling, Dust Sampling
Minimum Flowrate (ml/min) US$1,330.90
Maximum Flowrate (ml/min) US$5,323.60
Brand SKC
Available Outside the UK? No

SKC Universal Dust and Vapour Sampling Kit



Features

  • The perfect solution for all your personal dust sampling needs. It is used by hygienists and safety professionals who demand the ultimate in flexibility and reliability. Some key features are:
  • ATEX certified for use in hazardous areas
  • Wide flow range with built-in low flow pressure regulator
  • Integral flow indicator
  • High build quality for a long working life
  • Clear, anti-tamper cover protects the controls
  • Three models available with a choice of features
The Universal is also available in a range of basic pump, dust sampling, vapour/gas sampling and combined dust/vapour sampling kits.

SKC Universal Pumps

  • Weight: 915 g
  • Casing IP rating: IP20
  • Flow range: 1000 - 4000 ml/min (constant flow operation) 5 - 500 ml/min with adapter (constant pressure operation)
  • Flow control: ±5% set point constant flow
  • Flow indicator: Scale range 0.5 - 5.5 l/min
  • Battery pack: NiMH rechargeable, 2.0 Ah, 4.8 V
  • Storage & operating temperature: -20°C to +40°C
  • Operating humidity: 0 to 95% RH
  • Compensation range:
    Flow rate (l/min)Back Pressure (inches of water) 
    1 5 - 30 IOM sampler with GFA filter at 4 l/min
    2 0 - 25 = approximately 10 inches of water IOM 
    3 0 - 20 sampler with 0.8µm MCE filter at 2 l/min 
    4 0 - 10  = approximately 15 inches of water.

    • Typical run time: 8 hours minimum at 3000 ml/min and 20 inches of water back pressure

    224-PCMTX4 & 224-PCMTX8 only:

    • Timer: Run time display 0 to 9999 minutes Hold feature to pause pump and timer Fault shutdown for low battery and high back pressure with timer freeze

    224-PCMTX8 only:

    • Timer: Delayed start up to 9999 minutes Timed shut down

    Note: SKC Limited reserve the right to make changes to the specification and design of this product at any time without prior notice to the end user.

  • What's in the Box

    • Universal ATEX Approved Standard Pump
    • NiMH Battery Pack
    • Operating Manual
    • Tool Kit
    • Single Charger
    • 1m Length Tygon Tubing
    • Single Adjustable Tube Holder
    • Protective Tube Cover
    • Tube Breaker
    • IOM Foams
    • IOM Multidust Sampler
    • 5 IOM Multidust Cassettes
    • Calidaptor
    • Universal Step by Step Guide
    • Carry Case

    Downloads and Datasheets

    Write Your Own Review
    You're reviewing:SKC Universal Dust and Vapour Sampling Kit