SKU
01GA902SS

GA902SS Stainless Steel Noise Warning Sign

Castle Group
Add to Wish List Email to a Friend

This it the Stainless Steel version of the hugely popular GA902 Noise Warning Sign. It's stainless steel body makes it ideal for environments within the food and pharamceutical industryies. 

US$1,078.03
Add to Compare

Maximum 45 characters

Product Specification unless deselected above

More Information
Weightings A
Application Noise Level Indicators
Brand Castle Group
Available Outside the UK? Yes

GA902SS Stainless Steel Noise Warning Sign

According to industrial safety law, areas subject to hazardous noise must be clearly defined, and workers notifies of the danger. But in many cases, the noise hazard is intermittent especially in the food and pharmaceutical industries - and that’s precisely the situation the GA902SS was designed for. It activates only when the noise exceeds a pre-set level allowing exposed workers to wear ear defenders - often a less than popular safety measure - only when absolutely necessary.

Being stainless steel and sealed, the GA902SS can be hose-piped and does not present any risk of contamination. Warning text is generally supplied to EC requirements, but alternative graphic and languages are available to order.

Fitting the optional Remote Beacon greatly increases the warning impact, especially in large area.

The GA902SS is a self-contained unit housing its electronics in tough stainless steel, and is easily installed and set for action. The front panel text is available as standard in EC or USA forms, but can be ordered in any language and a variety of colours.

The front panel is completely blank when idle but brilliantly lit when activated to give an easily noticed warning. Outputs from the master unit can also trigger other external devices such as machines or process cut-off actuators - a complete system.

Custom screen text can be obtained where necessary

Measuring Range 75 dB to 112.5dB steps switch selectable 2.5dB variable calibration control (factory set)
Trip Time User Adjustable 5 to 30 seconds
Controls Push to Test button Mains Power "on" indicator
Detector Characteristic: Averaging
Frequency Weighting 'A' in accordance with IEC651 Type 2
Time Response Slow Response (1000mS)
Microphone Built in Castle 1/2" electret
Outputs Switched AC power feed for external beacon; Change-over relay contact sets
Power 220V to 240V AC,50Hz/60Hz or 100V to 120V AC,50Hz/60Hz (Select on order)
Illumination Two 8w, 12" fluorescent tubes
Dimensions Front: 500 x 240 Back: 300 x 240mm Width: 140mm

Downloads and Datasheets

Write Your Own Review
You're reviewing:GA902SS Stainless Steel Noise Warning Sign