SV 258 Pro Sound and Vibration Monitoring Station - 3G Communication

SKU: 06SV258Pro

Be the first to review this product

£5,750.00

This is the SV 258 Pro Sound and Vibration Monitoring Station, operating the SVAN 958A Sound and Vibration Analyser with a 3G modem to transfer live readings to internet based software called SvanNet.


This easily transportable station is perfect for a variety of applications, including the monitoring of construction, tunneling and blasting sites. The kit includes:



  • SM 258 Pro Outdoor monitoring station for SVAN 958A including 17Ah battery, SP 270 3G modem

  • SB 270 waterproof power supply

  • SC 278 Cable for SV 207B (SV 84) and SV 258

  • SV 207B Building vibration accelerometer and mounting adapter

  • SA 251 Carying case for accelerometer and accessories

  • SvanNet Web interface and connectivity support

£5,750.00
SV 212 Sound & Vibration Monitoring Case System Kit
SV 212 Sound & Vibration Monitoring Case System Kit SV 212 Sound & Vibration Monitoring Case System Kit SV 212 Sound & Vibration Monitoring Case System Kit

Have a question about this product? /
Would you like a quote?

- Email us on sales@castleshop.co.uk
- Call us on 01723 584250
- Use the live chat in the bottom right corner

Product Specification unless deselected above

Brand Svantek
Available Outside the UK? No

SV 258 Pro Sound and Vibration Monitoring Station with SVAN 958A Instrument and 3G Remote Communication

This is the SV 258 Pro Sound and Vibration Monitoring Station, operating the SVAN 958A Sound and Vibration Analyser with a 3G modem to transfer live readings to internet based software called SvanNet.

This easily transportable station is perfect for a variety of applications, including the monitoring of construction, tunneling and blasting sites.

The SV 258 kit includes:

  • SM 258 Pro Outdoor monitoring station for SVAN 958A including 17Ah battery, SP 270 3G modem
  • SB 270 waterproof power supply
  • SC 278 Cable for SV 207B (SV 84) and SV 258
  • SV 207B Building vibration accelerometer and mounting adapter
  • SA 251 Carying case for accelerometer and accessories
  • SvanNet Web interface and connectivity support



Applications:

  • Sound measurements
  • Environmental noise
  • Building acoustic
  • Infrasound
  • High level/low level noise
  • Hand-arm vibration
  • Whole-body vibration
  • Machine vibration
  • Building/ground vibration

Technical Specification

SV 258 Pro Sound & Vibration Monitoring Case System

General Specification:
Remote Communication GPRS modem (option)
LAN & WLAN module (option)
Power Supply Battery recharging: 15 V ÷ 30 V (waterproof connector)
DC power supply: 11 V ÷ 30 V (waterproof connector)
Mains power supply: 100 V ÷ 240 V
Internal battery: 33 Ah (12 V)
Environmental Conditions Temperature: -10 °C ÷ +50 °C
Dimensions 420 x 340 x 210 mm (without antenna and cables)
Weight Approx. 19 kg including battery
SV 212 Noise & Vibration Monitoring Station with SVAN 958A:
Standards DIN 4150, Class 1: IEC 61672-1:2002
SLM Mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics - Ln (L1-L99), LMax, LMin, LPeak
VLM Mode RMS, VDV, MTVV or Max, Peak, Peak-Peak
Analyser (Option) 1/1 octave real-time analysis, Class 1, IEC 61260
1/3 octave real-time analysis, Class 1, IEC 61260
FFT analysis up to 1920 lines with Hanning, Kaiser-Bessel or Flat Top window
RMS and RMQ Detectors Digital true RMS & RMQ detectors with Peak detection, resolution 0.1 dB
SLM Time Constants Slow, Fast, Impulse
VLM Time Constants from 100 ms to 10 s
Microphone Set (Option) SV 208: MK 250 prepolarised 1/2” condenser microphone (sensitivity 50 mV/Pa),
SV 12L preamplifier, SA 203 outdoor protection kit for airport and community noise monitoring
Measurement Range 26 dBA RMS ÷ 140 dBA Peak
Frequency Range 3,5 Hz ÷ 20 kHz
Accelerometer Set (Option) SV 207B SV 84 accelerometer (triaxial, 1 V/g sensitivity) in hermetic case and mounting plate with leveling system of mounting spikes and fixing holes
Measurement Range 0.0005 ms-2 RMS ÷ 50 ms-2 Peak
Meteo Data SV 205A (option):
Temperature Range -40 oC ÷ 124 oC (±0.3 oC)
Ambient Pressure Range 150 hPa ÷ 1150 hPa (±5 hPa)
Humidity 0 % ÷ 100 % (±2 %)
Wind Speed 0 m/s ÷ 60 m/s (±2 %)
Wind Directions 0o ÷ 359o (±3o)
Rain Detector Installed

Svan 958A Class 1 Four-Channel Sound and Vibration Analyser

General Specification:
Input IEPE type (channels 1, 2, 3 - LEMO 4-pin & channel 4 - TNC connector)
Dynamic Range 100 dB, 4 x 20 bits A/D converters
Frequency Range 0.5 Hz ÷ 20 kHz, sampling rate 48 kHz
Memory 32 MB non-volatile flash type, external USB memory stick (not included)
Display Colour 320 x 240 pixels, OLED type
Keyboard 9 Push Buttons
Communication Interfaces USB 1.1 Client
USB 1.1 Host
RS232 (with SV 55 option)
External I/O - AC output (1 V Peak) or Digital Input/Output (Trigger - Pulse)
Power Supply Four AA batteries (alkaline) or four AA rechargeable NiMH batteries (not included)
USB interface 500 mA HUB
External power supply 6 V DC ÷ 24 V DC (1.5 W)
SA 17A external battery pack (option)
Environmental Conditions Temperature from -10 oC to 50 oC
Humidity up to 90% RH, non-condensed
Dimensions 140 mm x 82 x 42 mm
Weight Approx. 0.5 kg with batteries
SVAN 958A Sound Level Meter Specification:
Standards Class 1: IEC 61672-1:2002
Number of Profiles 3
Weighting Filters A, B, C, Z, G
Time Constants Slow, Fast, Impulse
RMS Detector Digital True RMS detector with Peak detection, resolution 0.1 dB
Microphone (Option) MK 250, Class 1, 50 mV/Pa, prepolarised 1/2"e
Preamplifier (Option) SV 12L IEPE type
Linear Operating Range 26 dBA RMS ÷ 140 dBA Peak (in accordance to IEC 61672)
Total Dynamic Measurement Range 16 dBA RMS ÷ 140 dBA Peak (typical from noise floor to the maximum level)
Internal Noise Level less than 16 dBA RMS
Dynamic Range >100 dB
Frequency Range 3.5 Hz ÷ 20 kHz with MK250 microphone
Meter Mode Results SPL, Leq, SEL, Lden, LEPd, Overload time, Ltm3, Ltm5, LMax, LMin, LPeak,
Simultaneous measurement in three profiles with independent filters and detectors
Statistics Ln (L1-L99), complete histogram in meter mode, averaging: linear of with detector (exponential)
Ln (L1-L99) statistics in 1/1 or 1/3 octaves (if option is active)
Data Logger logging of summary results with step from 30 s (auto-save function)
logging of time history with step from 10 ms
Wave Recording (Option) Time domain signal recording during measurement, trigger or continuous mode, 12 / 24 / 48 kHz sampling rate, 16 or 24 bit, wav format
Sound Analyser:
1/1 Octave Analysis (Option) Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 31.5 Hz to 16 kHz (audio band), selectable weighting filter, detector linear or
Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 1 Hz to 16 kHz (full band), selectable weighting filter, detector linear
1/3 Octave Analysis (Option) Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 20 Hz to 20 kHz (audio band), selectable weighting filter, detector linear
Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 0.8 Hz to 20 kHz (full band), selectable weighting filter, detector linear
FFT Analysis (option) 480 or 960 or 1920 lines in selectable band from 87.5 Hz to 22.4 kHz with selectable weighting filter, linear averaging, selectable window
RT 60 (Option) Reverberation time analysis in 1/3 octaves, selectable method: decay or impulse
RPM (Option) Rotation measurement option without Laser Tachometer (option), measurement of RPM, RPS, RMAX, RMIN
Cross Spectrum (Option) Transfer Function and Coherence calculation
Sound Intensity (option) FFT - based sound intensity calculation
Vibration Level Meter:
Standards ISO 8041:2005, ISO 10816-1
Number of Profiles 1 or 2 in Ground Vibration mode
Weighting Filters Wd, Wk, Wc, Wj, Wm, Wb, Wg (ISO 2631), Wh (ISO 5349), HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10, KB (DIN 4150)
RMS Detector Digital True RMS detector with Peak detection, resolution 0.1 dB
Time constants: from 100 ms to 10 s
Meter Mode Results RMS, MAX, Peak, Peak-Peak, Overload time, MTVV, VDV, CRF,
Accelerometer (Option) SV 84 triaxial high sensitivity accelerometer for ground or building vibration measurements (1 V/g)
SV 38 triaxial accelerometers for whole-body measurements (1 V/g MEMS type)
Measurement Range with SV 84: 0.0005 ms-2 RMS ÷ 50 ms-2 PEAK
Frequency Range 0.5 Hz ÷ 20 kHz; accelerometer dependent
Vibration Analyser:
Ground Vibration (Included) 2 vibration profiles for simultaneos measurement of PPV and VDV, simultaneous FFT analysis (if option active), simultaneous WAVE recording (if option active) according to DIN 4150-3 standard
1/1 Octave Analysis (Option) Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 1 Hz to 16 kHz (full band), HP weighting filter, detector linear
1/3 Octave Analysis (Option) Real-time analysis meeting Class 1 requirements of IEC 61260, center frequencies from 0.8 Hz to 20 kHz (full band), HP weighting filter, detector linear
FFT Analysis (Option) 480 or 960 or 1920* lines in selectable band from 78 Hz to 20 kHz with HP weighting filter, averaging: linear , and selectable window
*1920 lines not available for time history logging, minimum 50ms step for time history logging with 960 lines, minimum 20ms step for time history logging with 480 lines
RPM (Option) Rotation measurement option without Laser Tachometer (option), measurement of RPM, RPS, RMAX, RMIN
Cross Spectra (Option) Transfer Function and Coherence calculation

What's in the Box

The SV 258 kit includes:

  • SVAN 958A Four channel Sound & Vibration Analyser
  • SM 258 Pro Outdoor monitoring station for SVAN 958A including 17Ah battery, SP 270 3G modem
  • SB 270 waterproof power supply
  • SC 278 Cable for SV 207B (SV 84) and SV 258
  • SV 207B Building vibration accelerometer and mounting adapter
  • SA 251 Carying case for accelerometer and accessories
  • SvanNet Web interface and connectivity support

Software

About SvanPC++

This piece of advanced software supports Svantek measuring instruments. Each Svantek device is is easy to use and a complete measuring systems because of the functionalities and extended capabilities in this advanced application. The software has been divided for several specialised modules by distinguishing application fields in order to give users the perfectly customised, powerful and sophisticated tool. The functions provided by the main module include measurement data downloading from instruments to PC, measurement setups creating, basic Leq/RMS recalculation, measurement results in text, tabular and graphical format, export data to spread sheets or text editor applications.

Features include:

  • Being able to easily download data of measurements to a PC
  • Total Leq/ RMS recalculation
  • Quick reporting tool
  • A variety of presentation results including text, table and graphical format 
  • Advanced customisation of each view
  • Creation of measurement setups  
  • Merging of measurement files.

Write Your Own Review

You're reviewing: SV 258 Pro Sound and Vibration Monitoring Station - 3G Communication

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value