ETI MicroTherma 1 Microprocessor Thermometer

ETI MicroTherma 1 Microprocessor Thermometer

The Microtherma1 microprocessor based thermometer is able to measure temperatures in the range of 270 to 1768°C with a 0.1°C resolution over the entire range. Each thermometer incorporates an easy to read, custom 4.5 digital dual LCD display, with open circuit, low battery, hold and max/min and °C/°F indication. this thermometer should never need re calibrating as the built in microprocessor enables the instrument to continuously and automatically carry out self-diagnostic re-calibration. Another additional feature allows the user to adjust the reading (±2.5°C) to offset any probe errors, correcting any inaccuracies of the thermocouple probe. the MicroTherma 1 has the ability of accepting any type K, J, T, R, N, S or E thermocouple probe, and the probe type can simply be selected through the mode button. The instrument incorporates both max and min reading with a reset function and also features an auto-power off facility that maximises battery life which turns the instrument off automatically after 30 minutes of non-use, however this function can be turned off if it is not required. Other selectable parameters include:- display contrast and internal CJC temperature reading.

Features

• warranty: two years
• probe/sensor style: no probe included
• power source: battery powered
• power saving: auto-off
• measurement scale: Celsius/Fahrenheit
• max/min function: yes
• display type: LCD digital
• display hold: yes
• country of manufacture: United Kingdom
• certification: traceable calibration certificate
• case material: ABS plastic
• battery monitor: yes

Alternate Probes

• Penetration Probe
• Fast Response Probe
• Needle Penetration Probe
• PTFE Handle Probe
• Rigid Between Pack Probe
• High Temperature Probe
• Binder Probe
• Air or Gas Probe
• Ribbon Surface Probe
• Ribbon Surface Probe- 90 Degrees
• Heavy Duty Surface Probe
• Small Handled Needle Penetration Probe
• Small Handled Fast Response Probe
• Reduced Tip T-Shaped Penetration Probe
• PTFE Wire Probe
• Fibreglass Wire Probe
• Miniature Needle Probe
• Fast Response Meat Probe

Specification	MicroTherma 1
Range	-70 to 1768°C
Resolution	0.1°C/°F
Accuracy	±0.2°C ±1 digit
Battery	2 x 1.5 volt AAA
Battery Life	1000 hours
Sensor Type	thermocouple type K, J, T, R, N, S & E - selectable
Display	12.7mm LCD
Dimensions	35 x 73 x 141mm
Weight	220 grams