SKU
06222-213

ETI Reference Thermapen PT100

ETI
Add to Wish List Email to a Friend

The Reference Thermapen Thermometer: This is a high accuracy PT100 instrument that is supplied with a 5-point UKAS Certificate of Calibration. Each of the certificates indicates deviations from standards at various check points: -18, 0, 40, 70 and 100 °C.

US$173.02
Add to Compare

Product Specification unless deselected above

More Information
Thermometer Type Fixed Probe Thermometers
Measurement Application Immersion Measurement
Available Outside the UK? Yes
Brand ETI

ETI Reference Thermapen PT100

This is a high accuracy PT100 instrument that is supplied with a 5-point UKAS Certificate of Calibration. Each of the certificates indicates deviations from standards at various check points: -18, 0, 40, 70 and 100 °C. Special ranges can be certified by arrangement with the ETI UKAS calibration laboratory. This thermometer is ideal for comparison checking the calibration and accuracy of other thermometers and probes, when used in conjunction with a stable temperature heat or chill source. The instruments measure temperature over the range of -69.99 to 199.99 °C with a resolution of 0.01 °C and an accuracy of ±0.07 °C. This thermometer has an additional feature where the thermometer will automatically power off after ten minutes, this maximises battery life. This feature can also be disabled if it is not required by the user. Both the low battery icon and open circuit indication are displayed when applicable. Each Reference Thermapen is powered by two lithium coin cell batteries with a minimum life expectancy of 1000 hours. This thermometer also incorporates a stainless steel, liquid/penetration probe 3.3x108mm. This also conveniently folds back through 180 degrees into the side of the instrument when not in use.

Features

  • probe/sensor style: integral folding probe
  • power source: battery powered
  • power saving: auto-off
  • measurement scale: Celsius
  • display type: LCD digital
  • country of manufacture: United Kingdom
  • certification: UKAS calibration certificate
  • case material: ABS plastic
  • battery monitor: yes
  • warranty: two years

Specification

Reference Thermapen Thermometer

Range

-69.9 to 199.9°C

Resolution

0.01°C

Accuracy

±0.05°C (-30 t0 150°C) otherwise ±0.2°C

Battery

2 x 3 volt CR2032 lithium coin cell

Battery Life

1000 hours

Sensor Type

PT100

Display

12 mm LCD

Dimensions

19 x 47 x 153mm

Weight

97 grams

Write Your Own Review
You're reviewing:ETI Reference Thermapen PT100