Electromagnetic Fields (EMF)

WPT Probe

This is the WPT Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WPF3 Probe: 100Hz - 3GHz

This is the WPF3 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WPF6 Probe: 100kHz - 6GHz

This is the WPF6 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WPF8 Probe: 100kHz - 8GHz

This is the WPF8 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WPF18 Probe: 300kHz - 18GHz

This is the WPF18 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
SMP2 3 Probes Case

This is the larger SMP2 carrying case with space for up to 3 probes. Learn More

Add to Compare
SMP2 Tripod

This is the non-reflective wooden tripod. Learn More

Add to Compare
SMP2 H Tripod Extension

This is the Horizontal extension arm for the tripod for use with low frequency measurement. Learn More

Add to Compare
SMP2 Fiber Cable

This is a Fiber Optics I/O Port for use with the SMP2 EMF Monitoring Meter. It also includes a USB connector to PC. Learn More

Add to Compare
SMP2 Vehicle DC Power Adapter

This is a DC connector that you can use to recharge your SMP2 from a vehicle DC connector. Learn More

Add to Compare
WPT Wifi Probe

This is the WPT Wifi Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WP50 Probe: 10Hz - 3kHz

This is the WP50 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
WP400 Probe: 1Hz - 400kHz

This is the WP400 Probe for use with the WaveControl SMP2 EMF Meter. Learn More

Add to Compare
SMP2 EMF Monitoring Meter

This is the only device in it's class that offers genuine 2 in 1 performance for: Broadband Electromagnetic Fields - 1 Hz to 18 GHz Industrial Frequency Spectrum Analysis - 1 Hz to 400 kHz PC Software for report generation, data downloads and equipment management is included. Learn More

Add to Compare
SMP2 EMF Regulations Compliance System

This is the ideal kit for you to carry out a wide spectrum of EMF assessments, and combines all of the equipment required for 95% of EMF testing. Make your company EMF compliant to the UK Regulations, with SMP2's clever in-built templates to the relevant standards. This includes the SMP2 Dual EMF Monitoring Meter, a tripod, WP400 and WPF8 Probes and Carry Case. Learn More

Add to Compare
ATP Pocket Conductivity (EC) Meter

£45.00

This product is a pocket conductivity meter that gives fast, accurate and repeatable measurements of conductivity values and is easy to use. Displaying measured values as electrical conductivity measures EC. It has an impact-resistant ABS case, a splash-proof membrane keypad and a large LED display. The electrode can be extended up to 80mm. A screw trim pot allows for manual calibration. It has a pocket clip moulded on the rear of the case. An electrode, a protective cap, calibration screwdriver, 50ml calibration solution , a battery and a carry case are all things this product comes supplied with. As well as all of this you will receive 6 months warranty. Learn More

Add to Compare
Chauvin Arnoux CA41 Fieldmeter

£2,088.00

This is the CA41 Fieldmeter which offers an effective solution for the measurement of electromagnetic fields whether you are assessing Electromagnetic Compatibility (EMC), measuring exposure or seeking the sources of radiation. One of the main differences between the CA41 and the CA43 Fieldmeters is that the CA41 has its own probe with vertical polarisation whereas the CA43 has its own probe but with isotropic polarisation.
Learn More

Add to Compare
VX0003 Electric Field Strength Meter

£132.00

This product is the VX0003 electric field strength meter and provides a simple and economical method of testing electromagnetic pollution. It works in accordance with the Physical Agents Directive 2004/40/EC. Employers of a company are obligated to assess and measure electromagnetic field levels at which workers are exposed to and this product provides a quick and easy way to make EMF measurements. It uses 2 LED scales and has a range of 10Hz to 3Hz and an IP65 rating. Also it offers two measurement methods because of its internal antenna. Learn More

Add to Compare
VX0100 Electric Field Strength Meter

£239.00

This product is the VX0100 electric field strength meter and uses a digital display and automatic range selection to provide a simple and economical way to measure EMF levels in accordance with the European Physical Agents Directive 2004/40/EC. Employers are obligated to assess and measure electromagnetic field levels in which workers are exposed to. Learn More

Add to Compare
ELT-400 EMF Exposure Level Meter 1Hz - 400 KHz

£4,550.00

This is the ELT-400 EMF Meter which is a measuring instrument for assessing the safety of human exposure to radiation in magnetic fields. The ELT-400 can measure virtually any level in the low-medium frequency range (1Hz to 400KHz), measuring up to 80 Millitesla (mT). It can also be used for acceptance testing of electrically operated equipment according to the CE standard IEC/EN 62233 (formerly EN 50366), Generic Standard IEC 62311 as well as ICNIRP 1998 and ICNIRP 2010. This instrument provides direct evaluation of field exposure in comparison with major standard and regulations such as EMF Directive 2013/35/EU for workplaces. Learn More

Add to Compare
Chauvin Arnoux CA43 Fieldmeter

£2,852.00

This is the CA43 Fieldmeter which offers an effective solution for the measurement of electromagnetic fields whether you are assessing Electromagnetic Compatibility (EMC), measuring exposure or seeking the sources of radiation. One of the main differences between the CA41 and the CA43 Fieldmeters is that the CA41 has its own probe with vertical polarisation whereas the CA43 has its own probe but with isotropic polarisation.
Learn More

Add to Compare
EMDEX II - Low Frequency Magnetic Field Exposure System

£3,000.00

The EMDEX II is ideal for risk assessments and exposure measurements and is designed for measuring magnetic fields. It records fields based on user defined parameters and the data can be downloaded to a PC for further analysis. This approach to magnetic field measurement is flexible and easy to use and makes the EMDEX II suitable for both simple and complex measurements. The EMDEX II has a range of 0.1mG (Milligauss) to 120G (Gauss) at varying resolutions and can measure up to 20 distinct data sets. Learn More

Add to Compare
GM3120 Electromagnetic Field Indicator

£24.99

Out of stock

This highly sensitive EMF Indicator is a fantastic tool to carry out an initial assessment to see whether you may have any issues with both Electric and Magnetic fields and help you decide whether a full assessment may be necessary.
Learn More

Add to Compare
Standard EMDEX Mate

£726.31

This is the EMDEX Mate Magnetic Field Exposure Meter which is a cumulative exposure meter which provides reliable three-axis results that are displayed at the end of the measurement session. The principle quantities that are displayed (other quantities are available with custom internal software) are Minimum, Maximum, Cumulative Exposure Time, Percent of Time in Six Different Exposure Ranges, Standard Deviation and Time-Weighted Average. The Mate extends the capability of all investigators to perform exposure assessment studios for workers (during entire work periods or for individual tasks), children, home owners, and for all others where magnetic field exposure is to be evaluated. Learn More

Add to Compare

From April 2012 an EU Directive will place a responsibility on employers to ensure electro-magnetic field radiation is assessed and, where possible, reduced or measures are taken to reduce the risks and keep exposure below the Exposure Limit Value (ELV).

A range of level meters and measurement equipment for electro-magnetic fields are now available which can be used to measure electric and magnetic fields and worker exposure levels.

What are the EMF Risks in your Organisation?