SMP2 EMF Regulations Compliance System


Be the first to review this product

This is the ideal kit for you to carry out a wide spectrum of EMF assessments, and combines all of the equipment required for 95% of EMF testing. Make your company EMF compliant to the UK Regulations, with SMP2's clever in-built templates to the relevant standards.

This includes the SMP2 Dual EMF Monitoring Meter, a tripod, WP400 and WPF8 Probes and Carry Case.

Please Contact us for Pricing

EMF SMP2 With wooden Tripod
EMF Testing Kit SMP2 EMF SMP2 With wooden Tripod SMP2 EMF Meter SMP2 Screenshot SMP2 Testing Starter Kit SMP2 EMF Measurement SMP2 on Tripod SMP2 EMF Test under powerlines SMP2 Test outside

Have a question about this product? /
Would you like a quote?

- Email us on sales@castleshop.co.uk
- Call us on 01723 584250
- Use the live chat in the bottom right corner

Product Specification unless deselected above

Brand Wavecontrol
Frequency Range 1Hz - 400kHz, 300kHz - 18GHz
Probe Size 270mm x 115mm, 284mm x 60mm
Sensor Type Isotropic, RMS Diode Technology
Measurement Field (E) Electric Field, (H) Magnetic Field
Available Outside the UK? Yes

SMP2 EMF Compliance System

This is a unique combination of Broadband Measurements and Spectrum Analysis in a single device. The probes included measure from 1Hz to 18 GHz. The real time graphic display and intuitive operation make this one of the most popular EMF meters available to buy. Achieve reliable, fast and easy RF safety measurements in accordance with international standards. There is low frequency spectrum analysis using FFT (Fast Fourier Transform) and WPM (Weighted Peak Method) techniques. You can complete broadband measurements using different field probes (interchangeable and automatic recognition).

Make Your Company Compliant with the SMP2

Make your company EMF compliant to the UK Regulations, with SMP2's clever in-built templates to the relevant standards. These include:
  • ICNIRP10 Public
  • ICNIRP10 Workers
  • 2013/35/EU LowAl
  • 2013/35/EU HighAl
  • 2013/35/EU LimbAl
  • ICNIRP98 Public
  • ICNIRP98 Workers

Probes Included

You can find the probe specifications under the downloads tab.
  • WP400
  • WPF18

This kit includes the two probes above as together they cover 95% of the applications ever required to measure EMF. SMP2  EMF Frequency Probe Chart

Technical Specification

SMP2 EMF Monitoring Meter

Field Probes Automatic Detection and Recognition
Broadband 1 Hz - 18 GHz (depending on field probe)
Spectrum Analysis 1 Hz – 400 kHz (FFT)
Weighted Peak Method 1 Hz – 400 kHz (Real time WPM for direct comparison with limits)
Readout Values Total field (instantaneous, max., min. and average)
Field components (X, Y, Z)
E Field Units V/m, kV/m, μW/cm2 , mW/cm2 , W/m2 , %
H Field Units nT, μT, mT, T, A/m, %, mG
Log Time Configurable (from 0,5 s to 6 min)
Average Modes Sliding window, arithmetic and normative averaging according to international standards
Average Intervals 10 s, 15 s, 30 s, 1 min, 2 min, 5 min, 6 min, 10 min, 15 min, 30 min
Schedule Measurement customized (up to 24 hours)
Memory Capacity 4 GB (more than 1 million registers)
Data Downloading Mini-USB and Fibre Optics
Firmware Updating Mini-USB
Alarm 2400 Hz audible signal (adjustable threshold)
Display Type Color transmissive TFT (480 x 272 pixels)
GPS (Optional) Built-in u-blox 7 (56 independent tracking channels)
Battery Internal rechargeable Li-ion
Autonomy > 14 hours (with broadband probes)
Temperature Range -10ºC to +50 ºC
Size 100 x 215 x 40 mm
Weight 575 g

What's in the Box

This Kit Includes:

  • SMP2 Dual EMF Monitoring Meter
  • Wooden Tripod
  • WP400 Probe
  • WPF18 Probe
  • Carry Case

Write Your Own Review

You're reviewing: SMP2 EMF Regulations Compliance System

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

You may also be interested in the following product(s)