Product Specification unless deselected above
|| Field Calibration
|| Class 1, Class 2
|Available Outside the UK?
Casella Class 2 Acoustic Calibrator
This is the Class 2 Acoustic Calibrator, which is very small and housed in a rugged case which makes it easy to transport and keeps damage to a minimum. It is important that the kits are re calibrated before and after the results are taken because the results may be distorted if the meters are not reading correctly and therefore you may not comply to the work regulation standards. The class two has a lower accuracy than the class one calibrator, so it depends what type of accuracy is needed for the job. The technical specification shows the accuracy levels.
- Compliant with IEC 60942: 2003 and ANSI S1.40:2006
- Class 1 & 2 accuracy versions
- Digital technology ensures highly stable acoustic performance
- Dual calibration level (Class 1 version) of 94dB and 114dB at 1khz
- Rugged, ergonomic design
- Simple to use with incorrect microphone insertion warning
- Automatic power off to conserve life of battery, typically 2 years
The Insight Software.
This software enables you to download noise measurements from the CEL600 series sound level meters and the dBadge range of noise dosemeters. when the measurements are once downloaded you can view them in a graphical or tabular format. These then can be allocated to a person, place or process and reports can be generated. As the Insight software works with the CEL620, 630 and dBadge (CEL350) series meters, you will only have to learn one package and only create the database for your entries once.
Instrument Configuration and Download.
Any new measurements will be immediately detected and downloaded when a meter is connected to the computer (typically via the USB port). Alongside downloading measurements, the software will also show the meter's calibration information which can be used to configure the meter's settings.