TPI 9070 Smart Vibration Analyser

SKU: 069070

£399.00

This is the 9070 Smart Vibration Analyser which is a simple, easy to use, low cost vibration meter which records, analyses and displays vibration signals at the push of a button. The vibration values are displayed with colour coded alarm levels for ISO values and bearing damage (BDU). It identifies complex issues using the 800-line spectrum with zoom and cursor.

3 Year Limited Warranty

£399.00

Qty:

Add to Compare

Have a question about this product? /
Would you like a quote?

- Email us on sales@castleshop.co.uk
- Call us on 01723 584250
- Use the live chat in the bottom right corner

Product Specification unless deselected above
Brand	TPI
Measurement	Condition Monitoring, Diagnostic Vibration
Available Outside the UK?	Yes

TPI 9070 Smart Vibration Analyser

This is the 9070 Smart Vibration Analyser which is a simple, easy to use, low cost vibration meter which records, analyse and displays vibration signals at the push of a button. The vibration values are displayed with colour coded alarm levels for ISO values and bearing damage (BDU). It identifies complex issues using the 800-line spectrum with zoom and cursor. Readings can be easily saved and recalled with all alarm levels and settings stored in non-volatile flash memory. The simple to use Setup Wizard allows Run Speed and Machine Type to be entered.

The entry level system just couldn't be any simpler. Hold the meter against the machine press the button and see instantly if you have one of several faults including misalignment and bearing damage. Colour coded display and straightforward graphics means you can diagnose faults within seconds.

Easy Vibration Analysis is provided by a clear picture of machine problems detected with built-in band filters:

1x unbalance
2x misalignment
3x looseness

Features of the TPI 9070:

ISO Built-in Alarms
Easily identify bearing problems with BDU Reading
800 line FFT (spectrum)
Ruggedized IP67 case
3-year Limited Warranty
Full Color OLED Display
Built-in accelerometer with stinger
Optional long stinger and magnetic mount available

Applications for the TPI 9070:

Commercial / Industrial HVAC
Food Processing
Manufacturers
Mining
Packaging
Petrochemical
Pulp and Paper
Power Plants
Utilities
Automotive

Technical Specification

Size	7.95" x 2.36" (HxW)
Weight	280g (9.8oz)
Operating Temperature	0C to 50C (32F to 122F)
Storage Temperature	-20C to 70C (-4F to 158F)
Power Supply	2 x AA Batteries
Battery Life	Approximately 50 hours of Normal Use
Frequency Ranges	2/10Hz - 1kHz ISO and 2Hz - 3kHz
Frequency Resolution	100/200/400/800 lines
Displayed Amplitude Units	Acceleration in g / Velocity in inches per second or mm per second / Bearing Damage in BDU
Displayed Frequency Units	Hz, CPM or RPM
Input Range	+/- 50g
Dynamic Range	72 dB
Accelerometer Connector	Internal Sensor
Auto Set-Up of VA bands	2Yes