TPI

TPI 709R Flue Gas Analyser Kit

SKU: 06709R-KIT0

Be the first to review this product

Availability: In stock

From: £360.00

To: £590.00

Price as configured: £0.00

TPI 709R Flue Gas Analyser Kit - has all the features of the 708 PLUS high resolution 0.001 in H20, differential manometer for high efficiency and oil equipment, Measures CO, and temperature and Calculates CO2, efficiency, excess air, and CO air free. The carbon monoxide sensor used in this TPI combustion efficiency analyser features an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors. Use to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O2, and stack temperature.

* Required Fields

Price as configured: £0.00

TPI 709R Flue Gas Analyser Kit
TPI 709R Flue Gas Analyser Kit Charger Additional Accessory: TPI A740 Infrared Printer Additional Accessory: 2 x CK21M Pipe Clamps Additional Accessory: CPA1 Probe Kit Additional Accessory: Gas Sniffer Additional Accessory: Smoke Pump & Oil Filter

Have a question about this product? /
Would you like a quote?

- Email us on sales@castleshop.co.uk
- Call us on 01723 584250
- Use the live chat in the bottom right corner

Product Specification unless deselected above

Brand TPI
Number Of Gases 2 Gas
Available Outside the UK? Yes

TPI 709R Flue Gas Analyser Kit

TPI 709R Flue Gas Analyser Kit - has all the features of the 708 PLUS high resolution 0.001 in H20, differential manometer for high efficiency and oil equipment, Measures CO, and temperature and Calculates CO2, efficiency, excess air, and CO air free. The carbon monoxide sensor used in this TPI combustion efficiency analyser features an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors. Use to test flue gases in gas and oil fired equipment including high efficiency furnaces and condensing boilers. Measure CO, O2, and stack temperature.

All TPI analyzers feature quick and simple set up. Fast purge and the ability to perform fuel selection during start up enable tests to be performed quickly without requiring extra set-up time after initial start up. TPI analyzers also use the last selected fuel as the default setting. This feature prevents the need to perform fuel selection every time the analyzer is turned on

The carbon monoxide sensor used in TPI combustion efficiency analyzers feature an on-board filter capable of filtering NO (nitric oxide), NO2 (nitrogen dioxide) and NOX (combination of NO and NO2) to prevent cross sensitivity errors.

Features
  • Calculates combustion efficiency
  • Pump driven for fast response
  • Will not shut off if 15 ppm CO is present for increased safety
  • Ten selectable fuels: Natural Gas, LPG, Light Oil, Heavy Oil, Bituminous Coal, Anthracite Coal, Coke, Butane, Wood, Bagasse
  • Optional A740 IR printer available for hard copies of test results
  • Built-in differential thermometer
  • Store function to save up to 50 readings
  • Type K Thermocouple
  • Quick reaction spring loaded open wire sensor
  • Temperature range: -50 to +250°C
  • Clamps on to pipes up to 30mm diameter
  • 1000mm polyurethane lead
  • Pump driven for fast response
  • Push on fittings for fast and easy use
  • Will not shut off if 15 ppm CO is present, for increased safety
  • Large easy to read backlit display
  • Optional A740 IR printer available for hard copies of test results


Combustion Analysis
  • Check Net/Gross Efficiency
  • Adjust CO, CO2 & Ratio Values
  • Check CO2 & O2 Values on Appliance


Differential Pressure
  • Adjust Gas/Air Mixture
  • Test Air Pressure Switch
  • Use for Tightness Testing


Differential Temperature
  • Flow & Return Adjustments
  • Balance Radiators
  • Check Thermostat & Water Temperatures


CO Detection
  • Highlights CO Spillage
  • Indicates Areas of High CO Production

What's in the Box

This Kit Includes
  • TPI 709R Instrument
  • Rubber Boot
  • Soft Carrying Case
  • Sampling Probe (c/w Type “K” Thermocouple)
  • In-Line Water Trap Bowl Filter (c/w Spare Particle Filter)
  • Battery Charger
  • Mini In-Line Pump Protection Filter (c/w 5 spare filters)
  • Exhaust Spigot (removable)
  • Pressure Tubing (2 x 1 metres)
  • GK11M Air Probe
  • Instruction Manual

Downloads and Datasheets

Write Your Own Review

You're reviewing: TPI 709R Flue Gas Analyser Kit

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value