Product Specification unless deselected above
|Available Outside the UK?||Yes|
Optimize your energy efficiency with PEL100 Power and Energy Loggers. Offering much more than simple energy metering, our PEL100 electrical measuring instruments record electrical consumption while measuring and analysing the power supplied.
PEL100 Power and Energy Loggers enable you to monitor your installations in order to identify potential areas for improvement, optimize your energy performance and achieve significant savings.
Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously. Developed with a compact design to ensure they can be installed with their current sensors on any type of switchboard without preventing the cabiner door from closing. Installation is easy with the PEL's magnetised case, and it can also be installed without cutting off the mains electricity supply.
The PEL 100 Energy Logger record all the electricity consumption of factories, workshops, buildings, agency etc. This makes it simple for you to find out the precide details of your energy consumptions so that you can optimize and reduce your energy bills. Use the PEL to simultaneoously monitor real-time consumption and comparative historical consumption analysis.
All recording made with the PEL Energy Logger are time and date stamped. In this way, the gains achieved can be measured very simply by comparing the recordings before and after modifications to an installation. The analysis of the recordings made with the PEL100 before the modifications provides the period of reference. The various operations for maintenance, improvement of the electrical network and equipment, etc., can then be carried out.
A correctly-positioned PEL100 will quickly help to spotlight the points where work is required, without wasting any time. A follow-up period will then enable you to determine whether the solutions implemented are sufficient and, in particular, to measure precisely the savings achieved. The PEL100 will then provide the data for comparison with the recordings from the period of reference. The DataView®analysis software can then be used to produce customized reports.
|Display||Without||Triple digital display|
|Installation types||Single-phase, split-phase, three-phase with or without neutral and many other specific configurations|
|Number of channels||3 voltage inputs / 3 current inputs (calculation of neutral current)|
||DC, 50 Hz, 60 Hz and 400 Hz|
|Voltage range||0 to 1,000 V AC and DC|
2 to 240 AAC
|Voltage ratio/ Current ratio
||Up to 650,000 V / up to 25,000 A|
|Power||10 W to 10 GW / 10 var to 10 Gvar / 10 VA to 10 GVA|
|Energy||Up to 4EWh / 4 EVAh / 4 Evarh|
|Phase||cos φ, tan Φ, PF|
|Harmonics||Up to the 50th order|
|Min / Max:||Yes|
|Sampling / Acquisition rate / Aggregation||28 samples/period - 1 measurement per second
from 1 min to 60 min
|Memory||SD card, 2 GB (SD-HC up to 32 GB)|
|Communication||Bluetooth (Class 1), Ethernet, USB|
||110 V - 250 V (+ 10%, - 15 %) @ 50-60 Hz & 400Hz|
|Safety||IEC 61010 CAT IV 600 V and CAT III 1,000 V|
|Dimensions||256 x 125 x 37 mm without sensor|
|Weight||900 g||950 g|
|Casing||IP54, UL (pending)|