TPI 9085 Smart Vibration Analyser with Temperature

Be the first to review this product

Add to Wish List Email to a Friend

Smart Vibration, Bearing Condition & Temperature Analyser.

The TPI 9085 is a simple, easy to use, low cost vibration meter that records, analyses and displays vibration, bearing wear & temperature at the push of a button.

BENEFITS

Find machine faults before they stop your machine
Increase productivity and lower maintenance costs
Measure temperature to determine if a bearing requires lubrication, preventing wear and failure
Use temperature measurement to confirm a high BDU reading (bearing noise) is caused by a worn bearing and not noise from pump cavitation, gearbox noise, or a nearby noisy bearing
Temperature measurement aids in diagnosing a tight or loose housing or shaft fit on a bearing
Measuring temperature assists with potential electrical issues on motors such as winding insulation deterioration, single phasing, broken rotor bars etc.

US$2,655.15

Add to Compare

Description

Product Specification unless deselected above

More Information
Measurement	Diagnostic Vibration, Condition Monitoring
Brand	TPI
Available Outside the UK?	Yes

Smart Vibration, Bearing Condition & Temperature Analyser.

The TPI 9085 is a simple, easy to use, low cost vibration meter that records, analyses and displays vibration, bearing wear & temperature at the push of a button.

BENEFITS

Find machine faults before they stop your machine
Increase productivity and lower maintenance costs
Measure temperature to determine if a bearing requires lubrication, preventing wear and failure
Use temperature measurement to confirm a high BDU reading (bearing noise) is caused by a worn bearing and not noise from pump cavitation, gearbox noise, or a nearby noisy bearing
Temperature measurement aids in diagnosing a tight or loose housing or shaft fit on a bearing
Measuring temperature assists with potential electrical issues on motors such as winding insulation deterioration, single phasing, broken rotor bars etc.

FEATURES
• Collect vibration and temperature data
• Practically instantaneous readout of actual surface temperature
• Trend data using C-Trend II PC software
• Standard Cable mounted accelerometer with Built in magnet and temperature sensor
• USB docking station to download to a PC
• ISO built-in Alarms
• Easily identify bearing problems with BDU (Bearing Damage Unit) Reading
• Easily identify problems with built-in band filters:
1X (unbalance)
2X (misalignment)
3X (looseness)
• 800 line FFT (spectrum)
• Wireless charging
• Ruggedized IP67 case
• 3-year Limited Warranty

C-Trend II powerful PC software gives you greater ease of use and flexibility.
• Store, analyse and report on all your vibration parameters in one place.

Tech Specs

Size	H 7.95", W 2.36"
Weight	280g (9.8oz)(not including magnet)
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Power Supply	Lithium ion wireless charging
Battery Life between charging	1,500 measurements or approximately 50 hours of normal use
Frequency Ranges	2Hz - 1kHz ISO, 10Hz - 10kHz g and 1kHz -10kHz BDU
Accuracy	+/- 5%
Frequency Resolution	800 lines FFT setting
Displayed Amplitude units	Acceleration in g / velocity in inches per second or mm per second / Bearing damage in BDU
Displayed Frequency Units	Hz, CPM or RPM
Displayed Displacement	Peak or peak to peak
Input Range	+/- 50g
Dynamic Range	96 dB
Displayed Temperature Range	-60°F to 300°F (-50°C to 150°C)
Accuracy	(+/- 2°C), (+/- 4°F)
Accelerometer connection	5 pin MIL connector cable with magnet and temperature sensor
Communication	Bluetooth or USB docking station and cable to PC; data integration using C-Trend II software
Standard accessories:	A9101 Low power accelerometer with A9105 cable, temp sensor and magnet, A9081A docking station with USB cable, Standard software and carrying case and A9086 Protective boot with magnets.